Mitsubishi Electric Factory Automation Engineering Products (Update C)
1. EXECUTIVE SUMMARY
- CVSS v3 8.3
- ATTENTION: Low attack complexity
- Vendor: Mitsubishi Electric
- Equipment: Mitsubishi Electric, Factory Automation Engineering products
- Vulnerability: Unquoted Search Path or Element
2. UPDATE INFORMATION
This updated advisory is a follow-up to the advisory update titled ICSA-20-212-04 Mitsubishi Electric Factory Automation Engineering Products (Update B) that was published January 14, 2021, to the ICS webpage on us-cert.cisa.gov.
3. RISK EVALUATION
Successful exploitation of this vulnerability may allow an attacker to obtain unauthorized information, modify information, and cause a denial-of-service condition.
4. TECHNICAL DETAILS
4.1 AFFECTED PRODUCTS
The following products and versions are affected:
- C Controller Interface Module Utility, all versions
- C Controller Module Setting and Monitoring Tool, all versions
- CC-Link IE Control Network Data Collector, all versions
- CC-Link IE Field Network Data Collector, all versions
- CPU Module Logging Configuration Tool, Versions 1.100E and prior
- CW Configurator, Versions 1.010L and prior
- Data Transfer, Versions 3.42U and prior
——— Begin Update C Part 1 of 2 ———
- EZSocket, version 5.1 and prior
——— End Update C Part 1 of 2 ———
- FR Configurator SW3, all versions
- FR Configurator2, all versions
- GT Designer2 Classic, all versions
- GT Designer3 Version1 (GOT1000), Versions 1.241B and prior
- GT Designer3 Version1 (GOT2000), Versions 1.241B and prior
- GT SoftGOT1000 Version3, Versions 3.200J and prior
- GT SoftGOT2000 Version1, Versions 1.241B and prior
- GX Developer, Versions 8.504A and prior
- GX LogViewer, Versions 1.100E and prior
- GX Works2, all versions
- GX Works3, Versions 1.063R and prior
- M_CommDTM-IO-Link, all versions
- MELFA-Works, all versions
- MELSEC WinCPU Setting Utility, all versions
- MELSOFT Complete Clean Up Tool, all versions
- MELSOFT EM Software Development Kit, all versions
- MELSOFT iQ AppPortal, 1.17T and prior
- MELSOFT Navigator, all versions
- MI Configurator, all versions
- Motion Control Setting, Versions 1.005F and prior
- Motorizer, Versions 1.005F and prior
- MR Configurator2, all versions
- MT Works2, all versions
- MTConnect Data Collector, all versions
- MX Component, Version 4.20W and prior
- MX MESInterface, Versions 1.21X and prior
- MX MESInterface-R, Versions 1.12N and prior
- MX Sheet, Version 2.15R and prior
- Network Interface Board CC IE Control Utility, all versions
- Network Interface Board CC IE Field Utility, all versions
- Network Interface Board CC-Link Ver.2 Utility, all versions
- Network Interface Board MNETH Utility, all versions
- Position Board utility 2, all versions
——— Begin Update C Part 2 of 2 ———
- PX Developer, version 1.53F and prior
——— End Update C Part 2 of 2 ———
- RT ToolBox2, all versions
- RT ToolBox3, all versions
- Setting/monitoring tools for the C Controller module, all versions
- SLMP Data Collector, all versions
4.2 VULNERABILITY OVERVIEW
Multiple Mitsubishi Electric Factory Automation engineering software products have a malicious code execution vulnerability. A malicious attacker could use this vulnerability to obtain information, modify information, and cause a denial-of-service condition.
- CRITICAL INFRASTRUCTURE SECTORS: Critical Manufacturing
- COUNTRIES/AREAS DEPLOYED: Worldwide
- COMPANY HEADQUARTERS LOCATION: Japan
Mashav Sapir of Claroty reported this vulnerability to CISA.
Mitsubishi Electric recommends the following mitigations:
Please refer to the Mitsubishi Electric website for details on available patches.
Download the latest version of each software product and update it.
Refer to the manual for help to update affected products.
For users of a product that has not released a fixed version or who cannot immediately update the product, Mitsubishi Electric recommends taking the following mitigation measures to minimize risk:
- If a “File Name Warning” message is displayed when starting Windows, take appropriate measures according to the instructions in the message (such as changing a file name) and then install or operate the products.
- Operate the products under an account that does not have administrator privileges.
- Install an antivirus software in computers using the products.
- Restrict network exposure for all control system devices or systems to the minimum necessary and ensure they are not accessible from untrusted networks and hosts.
- Locate control system networks and remote devices behind firewalls and isolate them from the network.
- Use virtual private network (VPN) when remote access is required.
Additional information about the vulnerabilities or Mitsubishi Electric’s compensating control is available by contacting a Mitsubishi Electric representative.
CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
CISA also provides a section for control systems security recommended practices on the ICS webpage on us-cert.cisa.gov. Several recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
Additional mitigation guidance and recommended practices are publicly available on the ICS webpage on us-cert.cisa.gov in the Technical Information Paper, ICS-TIP-12-146-01B–Targeted Cyber Intrusion Detection and Mitigation Strategies.
Organizations observing any suspected malicious activity should follow their established internal procedures and report their findings to CISA for tracking and correlation against other incidents.
CISA also recommends users take the following measures to protect themselves from social engineering attacks:
- Do not click web links or open unsolicited attachments in email messages.
- Refer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.
- Refer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.
No known public exploits specifically target this vulnerability.